Brief Introduction

        ZC2516 series intelligent low resistance tester is specially used to test various resistors, with touch function of 24-bit color 4.3-inch color LCD screen, simple operation, fast test speed, suitable for various resistance design, inspection, quality control and production testing. The machine is equipped with three grade sorting functions. In the sorting state, the resistance value or percentage value can be displayed, and the resistance value can be judged as too large, too small or good quality according to the set value. At the same time, there is a sorting interface on the back panel of the instrument, which enables the interface to start signals and enable the instrument to conduct measurement. The test results are output by the interface on the back panel at the same time. Through this signal interface, the instrument can be connected to the component mechanical processing equipment for automatic testing. In addition, the machine has USB interface and Handler port, the panel function can be completely controlled by the computer, the test results can be sent back to the computer through USB interface or USB interface, or the data can be stored directly on the U disk.

Performance Feature

• Basic accuracy: ±0.05%±2 words.

• U Ω resistance minimum resolution: 1.
  

• With low resistance test mode, it can effectively protect the tested part.
  

• Two display modes: direct reading of resistance value or percentage value.
  

• Sorting function: LOW, PASS, HIGH, Handler and signal output.
  

• Measuring speed: fast 20 times/s, medium speed 10 times/s, slow speed 2.5 times/s
  

• USB interface function.
  

• Handler port function.
  

• Usb disk interface function.
  

• Panel key reset function.
  

Technical indicators